

CROSS SECTIONAL LINE DRAWING

AspireSpan (PIR)
- PIR Core
- AspireSpan consists of a 0.59mm profiled roofing sheet bonded to a PIR core with a ceiling panel sheet bonded to the underside.
- Codemark Certified
- Aspirespan® is now Codedmark Certified. Please refer to Codemark certification for scope and limitations of use of Aspirespan®
- NZ MANUFACTURED:
- Manufactured in Auckland, using locally and imported products. Available nationwide
- MINIMUM PITCH:
- 3 degrees
- SHEET LENGTH:
- Lengths from 2m-24m. Please note lengths are restricted by transportation to site. If sheet lengths longer than 15m are required, please check with Metalcraft Insulated Panels.
- NZ Steel - COLORSTEEL®
- NZ Steel - COLORSTEEL® colours providing perfect colour match with flashings
- ORIENTATION:
- Roof and wall cladding
Downloads
Download AllInstallation details available for download in PDF, DWG, DXF & RVT files
Loadspan Tables and Product Information
Commercial Roof Details
Residential Roof Details
External Wall Details
Redco 236641 Loadspan Tables
Redco 24340 Issue 1 Wall to Roof Fixings
Redco 24340 Wall to Roof Fixings Sheets
Redco 23950 Issue 5 Fixings to underside
Redco 25690 Issue 3 Axial Load Tables
Masterspec Links
Maintenance Brochure
Codemark Certificate
Metalcraft Codemark Designer Declaration
What is Codemark
Colour Guide
Determine your wind zone
Design and Installation Guide
H1 Guidance Document
Roofing Order Form
COLORSTEEL® Maxam™ Product Information Sheet

150MM THICK ASPIRESPAN® ACHIEVES R7.01 this exceeds the minimum R-value requirement to comply with H1-Energy Efficiency
DOWNLOAD YOUR H1 COMPLIANCE GUIDE HERE
Manufactured in Auckland - Max length 24m. Please note Lengths are restricted by transportation to site.
External Facing: 0.59mm CP Grade Prepainted Galvanised Steel or COLORSTEEL® Maxam™. The correct steel is dependent on the environmental category and corrosion zone, please consult Metalcraft Insulated Panels.
Internal Facing: 0.59mm CP Grade Prepainted Galvanised Steel.

BENEFITS OF NZ MADE INSULATED SANDWICH PANELS
Aspirespan® is a stressed skin sandwich panel, comprised of pre-painted steel skins continuously laminated over a fire retardant flat PIR core. Aspirespan® is available in a range of colours with a variety of profile finishes, providing greater strength in walls and a clean, smooth aesthetic look
• NZ Made for longer sheet lengths and shorter lead times
• Fire retardant PIR flat core
• Longer lengths
• Shorter lead times
• NZ Steel - COLORSTEEL® colours providing perfect colour match with flashings
• Thermally efficient
• Ease of cutting and trimming on site
• Minimal mess on site
• Compatibility with openings and design elements of the building
What now?
COLORSTEEL® COLOUR OPTIONS
All colours are available in COLORSTEEL® Maxam™. The standard colour is Titania on both sides. The colour Ebony is only suitable for interior linings. This is due to heat build-up on dark colours and, in the worst case, potential delamination of steel from the core. The colours Ironsand, Flaxpod®, Grey Friars, and Sandstone Grey are also available in a low-gloss finish. Please note that the colours below are indicative, and we recommend you request a steel colour sample from your nearest Metalcraft Roofing branch. The homeowner should be aware that temperatures of dark colours are higher than those of lighter colours. Darker colours will thermally expand more. Thermal expansion of metal roofs is covered in the NZMRM Code of Practice. The MBIE document on roof cladding advises that noise from thermal expansion is normal and should be expected. Refer to MBIE -Guide to tolerances, materials and workmanship in new residential construction 2015.
Karaka
Gull Grey
Permanent Green
Mist Green
Lichen
FlaxPod®
Ironsand
Slate
Grey Friars
New Denim Blue
Thunder Grey
Sandstone Grey
Cloud
Titania
Scoria
Pioneer Red
Windsor Grey
TuiTuft®
StonePeak™ Matte
Sandscape®
SandBar™

ASPIRESPAN - CODEMARK CERTIFIED
Aspirespan® is now Codedmark Certified. Please refer to Codemark certification for scope and limitations of use of Aspirespan®
WHAT IS CODEMARK?
CodeMark is a voluntary product certification scheme that provides an easily-understood and robust way to show a building product or building method meets the requirements of the New Zealand Building Code.A CodeMark certificate must be accepted by Building Consent Authorities as meeting the requirements of the New Zealand Building Code, provided the certificate is current and the product or method is used in accordance with details noted on the certificate.